Electrical Considerations For Your New Tanning Bed

Posted on

If you're a frequent tanner, you may find it more convenient and cost-effective to invest in a tanning bed for your home. If you do decide to buy one, though, you'll have to pay special attention to your home's electrical grid and the tanning bed's requirements. Here are a few things to think about when it comes to the power supply for your new tanning bed.

Matching the Power Supply

Although most household appliances will work safely in a standard outlet, tanning beds need to be treated more like your stove or your dryer. You won't be able to plug it into a standard outlet, because the plug itself won't fit. Large tanning beds require a 220-volt outlet to ensure sufficient, consistent power. Since these outlets are typically limited in a home, you may need to have an electrician install a new one in the space where you want to put the bed.

Exploring Dedicated Electrical Circuits

If you want your tanning bed to function safely and properly, you're going to want to install a dedicated circuit for it. Most household electrical circuits have outlets that string together as a chain. That means each outlet in the house is connected to the ones before and after it. A single circuit breaker could be connected to many outlets, which results in tripped breakers taking out power to an entire zone or two of your home.

Since tanning beds draw heavily on power when they're running, they need to have an isolated circuit on your home's electrical grid. This ensures that you don't overload a circuit by using other appliances or lights while the tanning bed is running. You'll need to hire an electrician to do it, like Skyline Electric, Inc., but you can install an isolated circuit for the tanning bed.

These are two important factors to consider when you're adding a tanning bed to your house. Without proper plugs and sufficient isolated power, you may find that your tanning bed doesn't function at its best. Sometimes, this can weaken the integrity of the electrical circuit, cause a short or put you at risk of an electrical fire. Talk with your electrician today about installing the new outlet and dedicated circuit. While you're at it, request a safety inspection to be sure that any other wiring in the area is safe and in good condition. This way, there are no surprises when you install the bed.